model number

1756-A10

Allen-Bradley 1756-A10 ControlLogix 10-Slot Chassis is a CompactLogix chassis that is designed to provide a versatile, scalable platform for distributed ControlLogix operations. Featuring 10 slots with an available power supply of 1440 W of power, the chassis is capable of controlling up to 250 analog I/O or up to 375 digital I/O. Its modular design makes it easy to integrate with any system, allowing for fast, easy, and convenient installation. Additional features include local I/O connections, intelligent communications, and reliable performance, making the 1756-A10 a great option for any ControlLogix application. The 1756-A10 is compatible with the current ControlLogix control system and supports connectivity to a wide range of devices and multiple execution levels.

This chassis supports panel mounting with installation clearances of 15.3 cm (6.0 in.) for Top and bottom clearance and 10.2 cm (4.0 in.) plus the width of the power supply for side clearance. If installed side by side with another ControlLogix chassis, the required clearance between the chassis is 7.7 cm (3.0 in.) plus the width of the power supply. ControlLogix power supplies, whether standard, slim or redundant power supplies have dedicated slot situated at the left most location and do not occupy a chassis slot.

The 1746-A10 is available in Two (2) series, B and C. Series B chassis has an operating temperature range of 0…60 °C (0…140 °F) and -25…+60 °C (-13…+140 °F) for Series C modules while maximum surrounding air temperature is 60 °C (140 °F) for both series. This chassis is also provided with Functional Earth Ground that is designed to be terminated with 8.3 sq. mm. or 8 AWG solid or stranded copper wire with insulation rating of 90 °C (194 °F) or higher. It also has a Protective Earth Ground and designed to be terminated using a 2.1 sq. mm. or 14 AWG solid or stranded copper wire with insulation rating of 90 °C (194 °F) or higher.

1762-IF2OF2

The 1762-IF2OF2 MicroLogix analog I/O module by Allen-Bradley is an expansion I/O module that connects to MicroLogix 1100 / 1200 / 1400 programmable controllers and is built for industrial environments. The 1762-IF2OF2 has 2 differential unipolar inputs with a 2.5-ms update time. It has an integrated analog to digital converter which converts the received input signal to binary condes via successive approximation. The 1762-IF2OF2 has a common mode input voltage range of +/-27 Volts, with 55 dB at 50 to 60 Hertz in common mode rejection. It has +/-0.12% non-linearity, and overall accuracy of +/-0.55% full at -20 to 65 degrees Celsius (-4 to 149 degrees Fahrenheit), and +/-0.3% at 25 degrees Celsius (77 degrees Fahrenheit). It has an input impedance of 200 kOhms at the terminal voltage and 250 Ohms at the terminal current.

The 1762-IF2OF2 has an input voltage protection of +/-30 Volts and an input current protection of +/-32mA. The 1762-IF2OF2 has a maximum BUS draw current of 4 0mA at 5 Volts DC, and 105 mA at 24 Volts DC, with an analog operational voltage range between 0 and 10 Volts DC and 4 and 20 mA, which can reach a full-scale range of 0 to 10.5 Volts DC and 0 to 21 mA. It has a 12-bit unipolar resolution and repeatability of +/-0.12%. The 1762-IF2OF2 has dimensions of 90 x 87 x 40 millimeters (3.54 x 3.43 x 1.58 inches) and it weighs approximately 240 grams (0.53 pounds). It has an operational temperature range of -20 - 65 degrees Celsius (-4 and 149 degrees Fahrenheit) and a storage temperature between -40 and 85 degrees Celsius (-40 and 185 degrees Fahrenheit) at 5 to 95% non-condensing relative humidity. The 1762-IF2OF2 is built to function at an altitude of 2000 meters (6561 feet) without derating and to withstand a maximum shock of 30G.

1762-IQ32T

The Allen-Bradley 1762-IQ32T is an high-density discrete input module that is part of the MicroLogix Programmable Logic Controller (PLC) platform. This module is compatible for use with MicroLogix 1100, 1200 and 1400 controllers. It features Thirty-Two (32) input channels with group isolation. Specifically, this module has Four (4) groups of Eight (8) channels each group.

The 1762-IQ32T supports sink and source wiring configuration. The input channels are designed to accept an input voltage range of 10-30 VDC with nominal voltage level of 24VDC. Each channel has a minimum ON-state voltage of 10VDC and maximum Off-state voltage of 5VDC. It has an OFF-state current of 1.0 mA, minimum On-state current of 1.6 mA @ 10V DC or 2 mA @ 15V DC and maximum On-state current of 5.7 mA @ 26.4V DC and 6.5 mA @ 30.0V DC.

This module has physical dimensions of 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.) and weighs 200 g (7.05 oz). It has backplane current draw of 170 mA @ 5V DC and 0 mA @ 24V DC. The module’s input group to backplane isolation is rated 1,200V AC for 2 s or 1,697V DC for 2 s; 75V DC working voltage according to IEC Class 2 reinforced insulation.

1769-ow16

The 1769-OW16 is a Sixteen (16) channel Relay output module. This module is manufactured by Allen-Bradley for the 1769 CompactLogix product family. This module has Two (2) groups of Eight (8) channels each. This input groups are individually isolated which permits the group to operate with different or similar voltage category.

This module has Sixteen (16) form A dry contacts, with each channel capable of up to 2.5A per point. This allows the module to drive electrical and inductive loads with higher current rating. This module is also practical for use in system that operate in different voltage categories.
The 1769-OW16 connects to the MicroLogix or CompactLogix communication bus. Install this module to any adjacent module in the controller assembly. The communication bus also carries the supply voltage that powers the Compact I/O module. It occupies single slot in the chassis of either controller system.

When used with MicroLogix 1500 as expansion I/O, the module is installed after the base unit or to any adjacent Compact I/O. Only Compact I/O modules are supported by MicroLogix 1500. If used with CompactLogix system, the module is installed as a local or expansion I/O. It is inserted to the communication by by installing to an adjacent I/O module and locking the bus levers.

These parameters include module inhibition, packet interval, slot assignment and revision number. Detailed configuration is performed by accessing the module’s input data files. The data files store the status of the input addresses as well as module diagnostics.

1769-pa4

The Allen-Bradley 1769-PA4 is a CompactLogix I/O power supply. It can provide 120 to 240 Volts of AC power and 24 Volts of DC power to the CompactLogix 1769-L3x processors, controllers, and the I/O modules connected to it. Up to 8 modules can connect to each side of the 1769-PA4 for a maximum of 16 modules for one power supply. This power supply provides 4A of current at 5 Volts DC or 2A at 24 Volts DC. This module measures 2.76 x 3.43 x 4.65 inches and weighs approximately 630 g (1.39 lb). This power supply supports DIN rail or panel mounting. It has an open-style enclosure with integrated fuse that is replaceable with part numbers Littelfuse 02183.15MXP or the Wickman 19195-3 fuses.
The 1769-PA4 has components that include a bus lever with a locking function, LED status indicator, a power supply door with an identification label, both movable and stationary bus connectors (with male and female pins), a nameplate label, upper and lower tongue-and-groove slots, upper and lower DIN rail latches, a terminal block with finger-safe cover, and a housing cover for the replaceable fuse.
This power supply has a selectable input voltage range of 85 to 265 Volts and 170-265 VAC along an input frequency range of 47 to 63 Hertz. Its power consumption is around 200 VA at 120 Volts AC and 240 VA at 240 Volts AC and its maximum inrush current is 25 Amps at 132 Volts AC. The 1769-PA4 has a current capacity of 4 Amps at 5 Volts DC and one of 2 Amps at 24 Volts DC, a nominal input voltage of 120 to 220 Volts AC, a Wattage of 18 Watts, and an output voltage of 24 Volts DC. Its isolation voltage is continuous at 265 Volts from AC power input to the system.

1769-if4

The 1769-IF4 is an analog input module that is used with Allen Bradley’s MicroLogix 1500 and 1769 CompactLogix family of controllers.
The Four (4) input channels of this module are individually configured to receive current and voltage signals at ranges of 0-21 mA; 3.2 - 21 mA for Current and ±10.5V DC, -0.5…10.5V DC, -0.5…5.25V DC, 0.5…5.25V DC for Voltage. Nominal current signals are 0-20 mA and 4-20mA and voltage signals available are +/10VDC, 1-5VDC, 0-5VDC, 0-10VDC. This module is integrated with an Analog to Digital (ADC) circuit with conversion type of Delta-Sigma. The module’s conversion resolution are 14 bits or unipolar and 14 bits plus sign or bipolar. The data processed by the module can be configured with data formats as engineering units, scaled for PID, percent range and raw data.

The 1769 Compact I/O modules can be fine-tuned with the provided parameters such as process alarms, input filters, real time sampling, alarm deadband and others. When a channel is enabled, the internal open-circuit detection is automatically enabled. This open circuit detection also activates the under-range error bit of the module. When the errors are detected by the module, it can be made known to the controller and display a non-fatal system error which may be further linked to a monitoring system such as a Human Machine Interface (HMI) or Supervisory Control and Data Acquisition (SCADA).
The Allen-Bradley 1769-IF4 is a Compact I/O analog module. It can convert and store the analog data digitally. Four differential or single-ended channels are available for this module and it can perform auto-calibration when it is enabled initially in a channel or when the channel has a different configuration than that of the previous channel. Note that this module does not provide loop power for analog inputs and that it is necessary to have a power supply that matches the input transmitter’s specifications. The user can wire the 1769-IF4 module’s channels as single-ended or differential inputs. The 1769-IF4 also has a common mode rejection ratio that is greater than 60 dB and a normal mode rejection ratio of -50 dB at 50 to 60 Hertz. It has an open-type enclosure and it can be mounted on a DIN rail or panel mount. The connection cables compatible with the 1769-IF4 are 22-14 AWG solid and 22-16 AWG stranded. This module also comes with an LED status indicator and measures 87 x 35 x 118 millimeters.
The 1769-IF4 has input ranges of +/-10 Volts, 0 to 10 Volts, 0 to 5 Volts, 1 to 5 Volts, 0 to 20 mA, and 4 to 20 mA. Its maximum current draw is 5 Volts DC for both Series A and Series B modules and 24 Volts DC for Series B modules. The rated working voltage is 30 Volts AC or DC and the common mode voltage range is +/-10 Volts maximum per channel. The storage temperature requirement of the 1769-IF4 is -40 to 85 degrees Celsius, while its operating temperature is 0 to 60 degrees Celsius. The module’s operating vibration is 5 g at 10 to 500 Hertz and a relay operating vibration of 2 g while s operating shock is 30 g, non-operating shock is 40 g, and relay operation shock is 7.5 g. It also has a 2000-meter operating altitude and a non-condensing relative humidity of 5 to 95%.

1762-if2of2

The 1762-IF2OF2 MicroLogix analog I/O module by Allen-Bradley is an expansion I/O module that connects to MicroLogix 1100 / 1200 / 1400 programmable controllers and is built for industrial environments. The 1762-IF2OF2 has 2 differential unipolar inputs with a 2.5-ms update time. It has an integrated analog to digital converter which converts the received input signal to binary condes via successive approximation. The 1762-IF2OF2 has a common mode input voltage range of +/-27 Volts, with 55 dB at 50 to 60 Hertz in common mode rejection. It has +/-0.12% non-linearity, and overall accuracy of +/-0.55% full at -20 to 65 degrees Celsius (-4 to 149 degrees Fahrenheit), and +/-0.3% at 25 degrees Celsius (77 degrees Fahrenheit). It has an input impedance of 200 kOhms at the terminal voltage and 250 Ohms at the terminal current.

The 1762-IF2OF2 has an input voltage protection of +/-30 Volts and an input current protection of +/-32mA. The 1762-IF2OF2 has a maximum BUS draw current of 4 0mA at 5 Volts DC, and 105 mA at 24 Volts DC, with an analog operational voltage range between 0 and 10 Volts DC and 4 and 20 mA, which can reach a full-scale range of 0 to 10.5 Volts DC and 0 to 21 mA. It has a 12-bit unipolar resolution and repeatability of +/-0.12%. The 1762-IF2OF2 has dimensions of 90 x 87 x 40 millimeters (3.54 x 3.43 x 1.58 inches) and it weighs approximately 240 grams (0.53 pounds). It has an operational temperature range of -20 - 65 degrees Celsius (-4 and 149 degrees Fahrenheit) and a storage temperature between -40 and 85 degrees Celsius (-40 and 185 degrees Fahrenheit) at 5 to 95% non-condensing relative humidity. The 1762-IF2OF2 is built to function at an altitude of 2000 meters (6561 feet) without derating and to withstand a maximum shock of 30G.

1769-pa2

The 1769-PA2 is a 1769 CompactLogix Power supply, manufactured by Allen-Bradley. This power supply has a current capacity of 0.8A at 24 VDC.

When installing the Allen-Bradley 1769-PA2, an adjacent space of 50 millimeters must be left between it and nearby equipment in order to ventilate it properly. Also, when mounting the power supply module, make sure that no static, UV radiation, or debris will touch the module during installation or operation. Excessive heat must be avoided since this could cause damage to the whole power supply module. When the ambient temperature is excessively high, several ventilation methods must be applied. The 1769-PA2 module is an open power supply that has no enclosure.
The Allen-Bradley 1769-PA2 power supply can also be mounted on a DIN rail. An important thing to note when installing this power supply module is that it needs to be grounded. When connecting the module, a 14 AWG wire must be used and the leads must be kept as short as possible. The recommended wire type is a copper wire with a resistance of at least 90 degrees Celsius. It is recommended to place the Allen-Bradley 1769-PA2 compact I/O expansion power supply in an enclosure that protects the module from a corrosive atmosphere or contaminants that might come from the open air. If it is used in an enclosure, the use of air conditioners is recommended to combat the heat around the enclosure. The Allen-Bradley 1769-PA2 compact I/O expansion power supply comes with a fuse that offers protection against abnormal line transients and short-circuit currents. The 1769-PA2 module runs on 120 to 240 Volts of AC input power at a frequency between 47 and 63 Hertz. This power supply weighs only 2 pounds and it only measures 8 x 8 x 5 inches, making it easy to ship.

2711p-rp8a

The Allen-Bradley 2711P-RP8A is a logic module with 512MB of non-volatile RAM that uses AC voltage as a power source. It is compatible with PanelView Plus 6 700-1500 operator terminals. Due to its adjustable memory and capability in complex applications, this logic module can work in harsh environments. The Network interface for the 2711P-RP8A can connect to it with the CompactFlash, Ethernet, and USB ports available in this logic module. The module has flashing indicators for process identification and there are provisions to perform control panel operations or even connect to third-party applications at the click of a button.

Although there are standard features like a command shell, a common dialog box, and a PDF reader with the 2711P-RP8A, there are also extended features like remote desktop connectivity, Media Player options, and a Wordpad Text editor. Make sure to connect the protective earth terminal to a low impedance ground.

To avoid the loss of saved settings, make sure to connect the display module when the 2711P-RP8A is powered off.

Integrated with the 2711P-RP8A are internal memories pre allocated amounting to 512MB Flash Memory and 512MB Random Access Memory (RAM). This memory allocation cannot be modified however, may be upgraded by installing CompactFlash memories. The RAM is used utilized during the operator terminal runtime while the Flash memory is used for storing HMI files and data.

The 2711P-RP8A comes with the standard communication interfaces such as One (1) Ethernet, One 9-pin sub-D serial connection interface and Two (2) USB peripheral ports. It also hosts the power terminals for wiring of external supply voltage ranging 100-240 VAC with 50-60 Hz frequency.

2711p-t12w21d8s

This PanelView Plus 7 operator terminal from Allen-Bradley belongs to the latest visualization hardware offering by Allen-Bradley. With the 2711P-T12W21D8S’ modern interfaces, this operator terminal is able to meet the demanding environment of industrial applications.

This operator terminal has a Colored TFT LCD screen with resolution of 1280 x 800 SVGA in 18-bit color graphics and aspect ratio of 5:3. The screen has a typical luminance of 300 nits and comes with a non-replaceable backlight. It comes with a non-replaceable backlight with a minimum operational lifespan of 50,000 hr at an operating temperature of 40° C (104 °F) at minimum to half-brightness. This operator terminal has an expandable memory capacity with the installation of Secure Digital (SD) card with part numbers 1784-SD1 (1 GB) and 1784-SD2 (2 GB) or a removable flash drive.

761-L20AWA-5A

761-L20AWA-5A is an Allen-Bradley MicroLogix 1000 controller. It is an AC power supply controller. This controller is provided with Twelve (12) AC inputs, Four (4) analog inputs, Eight (8) relay outputs, and One (1) analog output. It also has a DF1 RS-232 communication port. The entire controller measures 7.87 x 2.87 x 3.15 inches. It also has several LED indicators, namely status LEDs, input LEDs, and output LEDs. It also has a 1K EEPROM memory that can handle up to 437 data-table words and 737 instruction words. The controller also has a maximum of 40 timers and 32 counters. Its typical program scan time/Kword is 2 milliseconds and the typical I/O scan time is 0.21 milliseconds. It has a 24 Volts DC sensor power with a maximum of 200 mA and with a maximum capacitive load of 200 μF.

The line voltage of the 1761-L20AWA-5A controller is 120/240 Volts AC. It has a real input power of 12 Watts at 120 Volts AC and 13 Watts at 240 Volts AC and an apparent input power of 20 VA at 120 Volts AC and 27 VA at 240 Volts AC. The transformer load available for this controller is 30 VA at 120 Volts AC and 33 VA at 240 Volts AC. Its digital input voltage is 120 Volts AC, it has an input current range of 0 to 20 mA -1LSB and an input voltage range of -10.5 to 10.5 Volts -1LSB. Output voltage range of this controller is 0 to 10Volts -1LSB and output current range is 4 to 20 mA -1LSB. The 1761-L20AWA-5A controller has the following response time for AC inputs: 8 milliseconds for nominal filter setting and an ON and OFF delay of a maximum of 20 milliseconds for both. It has a minimum power cycle of 50,000 and an isolation rating of 1500 Volts AC. The controller has an operating temperature of 0 to 55 Degrees Celsius when mounted horizontally and 0 to 40 Degrees Celsius when mounted vertically and a non-operating temperature of -40 to 85 Degrees Celsius. It has an operating shock of 10 g and a non-operating shock of 20 g. It also has a 2.5 g operating vibration and a 5 g non-operating vibration. The controller has a non-condensing relative humidity of 5 to 95%.

1762-L40BWAR

1762-L40BWAR primarily features Two (2) communication interface, located on the controller’s front panel and left side. Both communication ports are 8-pin mini-DIN circular connectors. The front panel port is the primary port that may be used for communication with programming workstations, Human Machine Interfaces (HMI) and Supervisory Control and Data Acquisition (SCADA) systems. The programming port is used only for controller programming, online edits and test functions. This ports functions simultaneously which helps prevents removal of existing connection to the primary port when controller communication is needed to be established at the same time.

The 1762-L40BWAR’s embedded I/O channels include Twenty (20) standard 24VDC inputs, Four (4) Fast 24VDC inputs and Sixteen (16) relay outputs. The input channels are composed of Twenty (20) standard inputs located at input channels 4 and higher while fast inputs are located at channels 0-3.

The 1762-L40BWAR is power by an external voltage range of 100-240VAC at frequency of 47-63 Hz. It is designed to withstand inrush current ratings of 25A for 8 ms when supplied with 120VAC and 40A for 4 ms when powered by 240VAC supply. The controller’s power supply usage is 82 VA with power supply output of 600 mA at 5VDC and 500 mA at 24VDC. This controller is capable of providing sensor power with maximum of 400 mA and 400 400 μF at 24VDC.

150-C85NBD

Allen-Bradley 150-C85NBD mainly features a microprocessor controlled soft-starting which is internally composed of six silicon-controlled rectifiers (SCRs)wherein Two SCRs are installed per phase for variation of the conduction period and control voltage. Control modes supported by the 150-C85NBD are Soft Start, Kickstart, Current Limit, Coast, and Soft Stop. SMC-3 smart motor controllers such as 150-C85NBD are also designed with a compact footprint, secure and simplified setup and integrated bypass. For enhancement of the 150-C85NBD’s functionalities, accessory components may be added to this motor controller.

The 150-C85NBD has Selectable Start Times such as 2, 5, 10, 15, 20, 25, or 30 s, Selectable Initial Torque of 15%, 25%, 35%, and 65% of locked rotor torque, Selectable Current Limit of 150%, 250%, 350%, and 450% of full load current, Selectable Kick Start of 0, 0.5, 1.0, or 1.5 s, Selectable Soft Stop of Off, 100%, 200%, or 300% of the start time setting when wired and Selectable Overload Trip Class of 10, 15, or 20.

Its power circuit has an operating voltage range of 200 to 480 Volts AC at 50 to 60 Hertz with an 85A input rating and it offers a 600 Volt AC voltage insulation, 2, 200 Volt AC di-electric withstands, 6KV impulse voltage, 1400V repetitive peak voltage, and 1000V μs DV/DT protection, with Category III-level over-voltage protection.

The 150-C85NBD has a control circuit with 100 to 240 Volts AC operational control voltage which also offers 1500 Volts AC di-electric withstand, 250 Volts AC insulation voltage, and 2.5KV impulse voltage at 50 to 60 Hertz. it has a 250 Volts AC auxiliary contact with 250 Volts insulation and an electromagnetic control circuit with a single 1A, 240 Volts AC normally-open relay contact.

22C-D010N103

Allen-Bradley 22C-D010N103 PowerFlex 400 series drive is engineered for use with fans, pumps, and other similar applications. It can work at a voltage range of 308-480V AC with an output of 480 volts and a current rating of 10 A.

You can attach and operate up to 3 line-started auxiliary motors to the 22C-D010N103 in addition to the main motor that is controlled by it because the 22C-D010N103 drive has a built-in auxiliary motor control system which you can enable or disable at any time. When you enable this function, the internal PID controller generates a reference and feedback signal in the 22C-D010N103 PowerFlex 400 drive. The reference and feedback signal adjusts the motor speed so that the reference signal is followed by the feedback signal. However, because of the additional output of the auxiliary motors in the system, the speed of the main motor may be reduced.

The 22C-D010N103’s motor interlock input feature identifies the motors that are not working and allows them to be skipped over to the next available motor. You can also use the 22C-D010N103’s AutoSwap function which ensures that equal stress is placed on each motor through the periodic swapping of the main and auxiliary motors. During an AutoSwap, the main motor connected to the 22C-D010N103 drive is stopped and the contractor is opened.